Preparation tools: nail file, nail dust brush, cotton towel, cotton, small wooden stick, nail lamp, 75 ° alcohol, 95 ° alcohol, nail top coat, UV gel, nail base coat.
1a:Polish the surface of the nails, using the rough gravel side of the nail file to polish the nail surface
1b:Use a nail file to polish the surface of the nails with fine gravel on one side
1c: Polish the side of the nail again. When polishing the side, gently peel off the outer skin of the nail edge with your fingers before doing the polishing
2a: Use a nail dust brush to remove dust from the surface and grooves of the nails.
2b: Dip a cotton swab in 75 ° C alcohol and wipe the nail surface.
3. Apply base coat by first applying it to the front edge of the nail, from one side of the front edge to the other, and then repeat it in the opposite direction.
4.:Apply a thin layer of base coat in the direction of your fingertips
5.:Use a UV nail lamp to illuminate the surface of the nails and solidify the base coat on the nail surface
6.:Brush the first layer of color UV gel on the front edge of the nail
7a: Brush a thin layer of color UV gel along the back edge of the nail towards the fingertip. When brushing the back edge of the nail, gently press the brush head onto the nail surface, slowly push 0.5mm towards the back edge of the nail, and then pull forward.
7b: Then brush both sides of the nails
8: Remove the nail gel. If the UV gel is accidentally applied to the skin, use a small wooden stick to roll up a little cotton to clean the nail edge
9: Irradiate the nail surface with UV nail lamp to cure the gel
10: Use the same method to brush the second color UV gel
11: Irradiate the nail surface with UV nail lamp to cure the gel
12: Apply the top coat and wrap it around the front edge of the nail
13: Apply top coat to the surface of the nails
14:Remove the top coat. If the top coat is accidentally applied to the skin, use a small wooden stick to roll up a little cotton to clean the nail edge
15:Irradiate the nail surface with UV nail lamp to cure the top coat
16: If the scrubing top coat is used, floating gel will be produced after irradiation with UV lamp, and it needs to be wiped off with 95 ° alcohol dipped in cotton pad.
The finished effect (gel nail polish should be 0.5mm away from the root of the nail, with uniform color, and wrapped around the front edge of the nail).
Post time: Dec-06-2023